Paint for the bathroom: how to choose the best option for finishing of walls

Paint for the bathroom: how to choose the best option for finishing of walls

It is possible to learn from this article what features paint for the bathroom has: classification and the overview of main types of the structures intended for rooms with the increased humidity level, their merits and demerits. The text contains recommendations which will help to decide on the choice of finishing material with optimum characteristics.

What to paint walls in the bathroom with: we choose finishing material

Repair in the bathroom – the expensive and difficult process demanding careful selection of materials. The room has to be clean and steady against moisture. Availability of mold is inadmissible therefore to finishing of walls special demands are made. The most budgetary covering is dye. This material not only is economic and plain in drawing. The painting structures allow to achieve unique interior decisions at the expense of saturated and juicy coloring which turn out by addition of pigments in mix.

Pay attention! Dye is not applied on those sites which contact to water, for example, of zone around sink and bathtub. It is desirable to trim these places with ceramic tile or to close glass panels.

To solve, than to paint walls in the bathroom, it is desirable to get acquainted with the existing range of structures, to weigh all shortcomings and advantages of each of types and also to define what of options will be suitable for creation of necessary art effect.

As finishing materials the following types of paints are applied to walls:

  • water emulsion;
  • latex;
  • acrylic;
  • silicone;
  • chlorrubber;
  • alkid;
  • oil.

The most important properties of dyes which are used for finishing of walls in the bathroom are the water resistance and protection against microorganisms, for example, of fungi and mold.

Whether aqueous emulsion inks are suitable for walls in the bathroom

Water emulsion structures are widely applied to finishing of walls.

These dyes have a number of advantages:

  • rather low price;
  • lack of unpleasant smell;
  • simple process of drawing;
  • environmental friendliness and safety;
  • the covering quickly dries;
  • under the influence of sunshine the surface well keeps color.

On photo walls painting by decorative water emulsion structures looks very attractively. Thanks to optimum viscosity the beautiful effect therefore designers have ample opportunities in the choice of covering for walls is gained. Using different tools, it is possible to apply original drawings on surface. Aqueous emulsion inks possess extensive color palette. Having added special pigments to structure, it is possible to receive any shade which will ideally fit into the conceived interior design of the bathroom.

Water emulsion dyes are used for creation of opaque and glossy surfaces. At material selection it is very important to consider basis type, its structure and also to use the suitable grounding structure. Advantage of these dyes is that any pollution can be removed easily from surface, having wiped wall with the wet rag or sponge, the wetted in soap solution. After that the given site is painted repeatedly.

Important! It is not recommended to apply water emulsion dyes on the sites contacting to water. If it cannot be avoided, it is necessary to select coverings with glossy surface. They are steadier against mechanical damages.

Paint for the bathroom on latex basis: advantages and shortcomings

As a part of latex dyes there are no antifungal additives therefore before painting walls in the bathroom them it is necessary to process the special grounding structure with antiseptic properties.

Advantages of dyes on latex basis:

  • elastic surface which masks minor defects of walls: cracks, chips;
  • strong covering;
  • resistance to mechanical loadings;
  • excellent decorative properties;
  • lack of unpleasant smells;
  • dye creates the thin film protecting walls from pollution on surface;
  • universality;
  • the maximum time of drying is 2 h.

The latex surface rather badly transfers low temperature impact. As a result of their influence the covering bursts. Negatively latex dyes react also to impact of sunlight because of which the surface of covering burns out and loses brightness. The price of these structures is much higher, than water emulsion therefore finishing work in the bathroom will be more expensive.

Favorable characteristics of acrylic paint for the bathroom

Specialists consider acrylic structures the most optimal variant for coloring of walls in the bathroom. This type of dyes belongs to finishing materials on water and disperse basis.

Why it is favorable to buy acrylic paint for the bathroom:

  • big color palette and shades;
  • resistance to pollution;
  • simple process of drawing;
  • presence of easy, but not pungent smell which does not cause unpleasant feelings during coloring of walls;
  • pollution easily are removed from surface;
  • wiping of walls wet rag and soap solution does not damage covering;
  • the composition of dye has included antifungal additives which prevent development of mold;
  • structures are positioned as waterproof paints for the bathroom therefore they can be used for finishing of zones which constantly contact to moisture;
  • before coloring preparation of walls is not required;
  • thanks to optimum viscosity dye hides small errors on surface.

Helpful advice! Selecting dye, it is desirable to be guided by products of the leading producers. They are rather dear, but are capable to create high-quality and long-lasting covering on walls.

Pluses and minuses of use of silicone paints for walls in the bathroom

Deliberating over with what paint to paint walls in the bathroom, it is worth paying attention to the structures having silicone and silicate basis. This category of finishing materials enjoys wide popularity in the market thanks to the unique physical properties.

Advantages of silicone dyes:

  • the covering does not pass water at all;
  • high resistance to pollution;
  • the structure forms on surface of walls covering with vapor-tight properties;
  • dye is capable to block considerable errors of walls, for example, hollows and deep cracks.

Silicone structures belong to the category of waterproof paints for the bathroom. Water emulsion options it is better than the others, are suitable for rooms with the high level of humidity, however their cost is very high that is the main shortcoming.

It is not recommended to use for finishing of walls in the bathroom silicone water emulsion dye on the basis of glue. This structure is intended for rooms with dry microclimate. It can be used only as covering for ceiling in the bathroom.

Characteristic of chlorinated waterproof paint for the bathroom

The most reliable and practical option of covering – chlorinated rubber paint. This structure can become fine replacement of mosaic or ceramic tile. This type of covering does not need frequent updating and throughout long term keeps attractive exterior.

Advantages of walls painting in bathing chlorinated rubber paint:

  • moisture resistance;
  • the covering is capable to maintain continuous contact with water;
  • is not afraid of direct exposure to sunshine;
  • does not burn out under the influence of ultraviolet;
  • on condition of right choice of structure dye can be used for finishing of walls in the bathroom;
  • in structure there are no hazardous and toxic substances.

Thorough training of walls in the bathroom under painting by chlorrubber structure is required. This type of covering is applied on cement and metal surfaces. And for this purpose preliminary putting hard putty and primer is not required, however it is necessary to get rid of old covering completely.

Finishing of walls chlorinated rubber paint can pour out in the considerable sum. To receive qualitative covering, it is necessary to apply at least 3 layers on surface. It will not turn out to use normal solvents. In this case special structures are applied. However the received result and favorable characteristics completely justify costs of material purchase.

Pay attention! Despite the lack of toxic and hazardous substances in structure, it is forbidden to use chlorinated rubber paint as covering for tanks where the potable water is poured.

Features of painting of the bathroom alkyd enamel

All alkyd enamels are suitable for finishing of walls in the bathroom. At the expense of film tension — it the covering perfectly pushes away water therefore it is possible without being afraid to do wet cleaning of walls.

Why it is favorable to buy enamel for the bathroom:

  • under the influence of sunshine color of covering does not burn out;
  • excellent protection of metal against rust;
  • durability of covering;
  • fast drying;
  • the transparency of layer well hides errors on walls.

Alkyd enamels have also shortcomings. First, these structures are characterized by unpleasant and pungent smell. Secondly, before putting dye the surface of walls needs thorough training. To prevent fall, the basis should be covered with primer. The qualitative covering can be received only on condition of drawing several layers of alkyd enamel.

Features of application of oil paints for walls

Oil-based paints are considered as the most available and budgetary option of finishing. However this material class has more shortcomings, than advantages.

Minuses of oil dyes:

  • pungent smell during drawing;
  • the covering very long dries;
  • it is heavy to peel the paint from wall if it is required to update repair in the room.

Oil-based paint creates vapor-tight film on surface that is essential shortcoming, especially so far as concerns the bathroom. In rooms with the increased level of humidity of wall have to “breathe”. Otherwise on their surface the perspiration which is the favorable environment for reproduction of bacteria will accumulate.

The tightness of oil film is useful for finishing of floors in the bathroom. This type of dyes is not suitable for walls at all as over time the covering bursts and showered.

Paint for the bathroom: how to choose the best option for finishing of walls

How to choose paint for walls for creation of interesting interior in the bathroom

Having decided on what paint is better for bathroom walls, it is necessary to think of coloring of future interior.

The choice of shade depends not only on personal preferences, but also on other factors:

  • style of the room;
  • room sizes;
  • amount of light;
  • constructional features of the room, for example, shortcomings or advantages which need to be hidden or emphasized.

Helpful advice! To achieve harmonious combination when coloring walls it is desirable to consider plumbing fixtures coloring.

Decoration of the walls by means of paint: finishing of interior of the bathroom

If the bathroom has the compact sizes, in this case it is desirable to use coverings of light shades. Similar registration will visually expand space, and use of nacreous paint for walls will enhance this effect. Pastel coloring ideally will emphasize furniture and plumbing fixtures in the bathroom as these furnishings most often have white shade. Having stopped on light tones it is important to remember that such finishing is applied on ideally equal walls. Otherwise all surface defects will be looked through.

If on walls of the bathroom there are small defects, it is better to use textured paints of light tones. That pastel registration did not look monotonous, it is possible to add contrast coloring to interior.

Rooms of the big size give more broad lands concerning walls painting, the design in this case can be the most various:

  • combination of different types of finishing;
  • play of contrasts;
  • application of patterns and drawings.

Interestingly walls painting options with use of geometrical patterns, for example, of triangles, rhombuses, zigzags look in interior. It is possible to apply to registration of the bathroom also dark coloring. However it is necessary to remember that on similar surfaces the marks left by water droplets and soap are visible. For this reason it is desirable to block those sites where moisture mosaic, glass panels or tile gets.

As it is better to paint walls in the bathroom: registration in different styles

Dye as finishing material for walls is used in many styles. This material is suitable for registration of bathrooms in classical style. The similar design is not limited to certain invoices and coloring. Besides the classical direction never loses the relevance.

The modern style hi-tech is based on use of strict glossy shades of cold color gamma. In this case for decoration of the walls it is desirable to use different shades of blue and gray color. The transparent, almost weightless regiments made of glass will become excellent addition.

Basis of such styles as art-decor and pop art make unusual saturated colors. The bright green bathroom will be ideally added by cheerful pictures or drawings from comics.

Originally the bathrooms issued in style Provence look.

The color gamma of this direction includes pastel shades:

  • beige;
  • pink;
  • lilac, etc.

Helpful advice! For registration of the bathroom in style Provence is better to use the frost coatings decorated with vegetable ornaments.

Whether it is possible to use decorative plaster for the bathroom

Decorative plaster can be used for decoration of the walls in the bathroom along with the painting structures. These materials are perfectly combined with each other, creating effective combinations.

Most often as finishing silicate moisture resistant plaster for the bathroom is used. This type of material creates strong covering on wall. The term of its service is more than 50 years. Plaster on the basis of silicates does not pass moisture at all. At the same time the covering does not interfere with natural ventilation of the room. Silicate plaster of antiseptichn and ogneuporn therefore it can be used in rooms with the increased humidity level.

Mineral plasters are also applied to finishing of bathrooms. The covering has steam permeability thanks to what the comfortable microclimate indoors remains. Life cycle of this material makes about 30 years.

Moisture resistant properties are inherent also in acrylic plaster. It is plastic and rather plain in application. This type of covering will serve not less than 50 years.

What to paint bathtub with defects with? What structures approach for this purpose best of all

Unlike plastic and steel articles, the pig-iron bathtub is capable to serve not less than 50 years, keeping at the same time the characteristics. It is strong and perfectly keeps heat. But even on condition of careful leaving the enamel covering is not capable to keep the novelty throughout all this term.

As a result of intensive operation on covering of bathtub different defects appear:

  • the yellowness caused by sedimentation of the iron which is contained in water;
  • chips which appear owing to application of aggressive cleaning agents and temperature influence;
  • the cracks appearing as a result of blows and falling of heavy objects.

For recovery of whiteness and integrity of covering of pig-iron bathtub dyes are used.

Certainly, to such structures serious demands are made:

  • water resistance and ability to maintain continuous contact with liquid;
  • resistance to influence of low and high temperatures;
  • resistance to influence of aggressive cleaning agents.

Two types of paints conform to these requirements: epoxy and acrylic enamel.

Helpful advice! To update covering specialists advise to buy acrylic paint for bathtub, the price of such restoration is 5 times less, than the cost of new bowl. Such economy can achieve if to cause structure with the hands.

Resurfacing by means of epoxy paint for pig-iron bathtub

Epoxy enamel is widely applied to restoration of bathtubs. This means is already checked and perfectly is suitable for coloring of bowl in house conditions. Nevertheless training of structure for work demands difficult manipulations. Therefore not each consumer will risk to buy for pig-iron bathtub paint on epoxy basis.

The matter is that in addition to basis as a part of dye there is hardener and the plasticizer. As the component providing plasticity dibutylphthalate is used. Thanks to it dye turns out dense and viscous. Without having the corresponding experience and special purpose tool it is rather difficult to apply such covering on surface of bathtub and to receive at the same time uniform layer. Therefore works of this sort are performed only by professionals.

Features of use of acrylic paints for bathtub, the prices of restoration

Liquid acrylic is applied to restoration of bathtubs relatively recently. Professionals claim that this dye has practically the same utilization properties, as epoxy enamel.

Acrylic is suitable for coloring of pig-iron paint in house conditions without the assistance of specialists. Though preparation of quality mix demands certain efforts. Because of high viscosity of dye before drawing it is necessary to stir it very long and carefully. And mix consists of hardener and basis. At its preparation the plasticizer is not used. Acrylic dye also differs from epoxy enamel in it.

Hardener time as acrylic basis – dense has liquid consistence, in volume. Homogeneous substance therefore mix is stirred until it does not become fluid is applied on surface of bathtub. In this case process of coloring considerably becomes simpler. Though in comparison with epoxy enamel, restoration by means of acrylic paint will be more expensive.

How to paint the bathroom: technology of drawing and recommendation

When the design is thought over and materials for coloring of walls are picked up, it is possible to get to work. At the initial stage before putting dye it is necessary to prepare surface of walls.

For this purpose it is necessary to remove old covering:

  • to remove tile;
  • to remove pieces of the exfoliating plaster;
  • to wash away traces of outdated alkid or oil paint.

After that the surface of walls is carefully leveled and put finishing layer of putty. It is desirable that it had cement basis.

How to peel the paint from wall in the bathroom: ways of removal of finishing

In house conditions it is possible to remove dye from walls in two ways: mechanical and chemical. The last method assumes use of specialized removers. With their help traces of old covering can be removed successfully from metal and wooden surfaces.

The efficiency of removers on wall materials is not so high therefore most often masters resort to machining. But they will be irreplaceable in those places where access of the tool is limited. In such cases the necessary zone is processed by remover which is applied on surface by means of brush. In a few minutes the old covering will become jellylike thanks to what it can be removed with the palette easily. If the wall is painted in several layers, the procedure of remover is performed repeatedly.

The mechanical way of removal assumes use of hand or electrically operated hand tool. If the old covering is strongly damaged, it is possible to be limited to use of the scraper, axe, the scraper intended for the decorative coats, plane and other devices having wide keen edge.

If before coloring primer has been applied on wall, it will not turn out to remove covering by means of manual devices. In this case it is necessary to use the electric tool, for example, drill, the angular grinder, the perforator or the construction hair dryer.

Pay attention! For removal of old covering the drill in combination with the nozzle having several metal chains is used. In the course of work links fray and can fly away. To avoid injuries, it is necessary to check condition of chains and to timely carry out their replacement.

As it is correct to paint walls in the bathroom

The primer layer is applied on the prepared surface of walls. This structure has to have the antibacterial and waterproofing properties. To increase antiseptic characteristics of primer, it is possible to add liquid chloric bleach or copper vitriol to it. Drying requires not less than 12 h. After that walls can be painted in any pleasant color.

Depending on the recommendations of the producer dye is applied on surface in 2-3 layers. First of all it is necessary to process corners and hard-to-reach spots. The wall is painted completely, only after that it is possible to pass to following. For drawing it is possible to use brush, paint roller, paint spray gun.

How to paint tile in the bathroom: restoration of old tile

Updating of finishing on walls in the bathroom demands considerable expenses. If for full repair there is not enough money, it is possible to be limited to cosmetic option.

For change of coloring the following types of paints for tile in the bathroom are used:

  • alkid;
  • acrylic;
  • oil;
  • latex.

These structures perfectly lay down on tile surface, completely blocking it. To provide the necessary level of adhesion it is necessary to grind smooth and brilliant surface of tile. It is not recommended to dilute dye for the purpose of economy. The qualitative result is possible only if the consistence of structure will be dense. It is also possible to find special dyes for ceramic and glass surfaces in sale.

Any will be able to cope with coloring of walls in the bathroom. The main thing at the same time, to use quality dye which conforms to requirements of rooms with the increased humidity level and also to strictly follow technology. During operating time it is necessary to consider the recommendations of the producer. Only in this case the covering will turn out strong and long-lasting.

Like this post? Please share to your friends:
Leave a Reply