Table of Contents
From this article it is possible to recognize all advantages and nuances of such finishing material as paint by tree for odourless internal works. Let’s in detail consider the main kinds of the structures intended for finishing of living rooms, their advantage and property. Information on producers, popular in this category, and average quotations on their products is also provided in the text.
Paint on tree for odourless internal works: specifics of material
For finishing of internal rooms the coloring method is quite often used. Living rooms make special demands for composition of the dyes applied on surfaces. As in such rooms of people spends much time, it is important that finishing materials quickly dried, had no smell and were ecologically clean.
Fortunately, in the market there are a lot of modern materials having necessary properties. Thanks to them paintings are indoors carried out safely, comfortably and without toxic evaporations.
With what paints to paint walls in the house: main selection criteria
Can seem that the choice of dye for premises is very simple. Actually qualitative result depends on many factors, including increased requirements to characteristics of structure and operational conditions of the room.
Selecting suitable type of dye for internal paintings, it is necessary to pay attention to the following parameters:
- durability of covering;
- degree of resistance to moisture influence;
- ecological purity;
- simplicity and availability of operation and also procedures for care of the painted surfaces;
- level of resistance to mechanical loadings (abrasion, damages);
- fire safety;
- the covering ability of material;
- decorative properties.
The affordable price of odourless quick-drying paint on tree is also one of criteria to most of which of buyers pay attention. To choose optimal variant of finishing material, it is necessary to make general idea about all kinds of structures, their features and properties and also advantages and shortcomings.
Pay attention! Many producers place emphasis on simplicity of work with this or that dye. For example, function of full transformation of rust is attributed to some dyes. But you should not neglect requirements for technology of works with structure and material of the basis. Especially, it concerns surface preparation stage to coloring. Therefore it is recommended to clean carefully the basis and to perform other works, despite of the properties declared the producer.
Features of the choice of paint on tree for internal works
Being in shop, first of all it is necessary to pay attention not to the characteristics declared the producer, and to composition of dye.
The majority of materials includes the following components:
- the pigment particles giving to covering certain shade;
- binding substance which acts as Basic Element and creates film covering on the processed surface;
- the fillers providing decorative properties, level of gloss and reliability;
- the additional additives giving to covering special characteristics.
It is possible to refer fire safety, ability to fast drying to special characteristics. Some types of structures, for example, paints for floor on tree, wearproof. For finishing of internal surfaces different types of structures are used: oil, acrylic, alkyd, etc. All of them have special characteristics and advantages.
To buy decorative paint for quality walls it is also necessary to consider operational conditions of the room:
- weather conditions of the building (the increased moisture level, availability of heating or its absence);
- of what type of wood the surface (breed, texture of basis) is made;
- what probability of emergence of the fire in the building (availability of fast-flammable objects and materials and also fire sources, their remoteness and extent of maintenance of fire safety requirements);
- whether there is at surface old covering (preliminary removal of paint from wall in certain cases can be required or it is necessary to select suitable type of paint).
Also, dye is selected taking into account expectations concerning decorative qualities, for example, desirable effect, the invoice, shade. In palette of paints for walls in the apartment it is possible to pick up any color, and the covering can be opaque, glossy, semi-gloss or structural.
How to remove from walls paint before coloring: instruction
Before the procedure of coloring it is recommended to remove old coat of paint from surface. Especially this requirement concerns oil structures which are not compatible to other types of coverings at all.
There are several ways how to peel oil paint from wall:
Important! It is not recommended to use temperature method of removal of coverings on wooden surfaces. Not each breed of wood can sustain such type of influence. Exception is the beech and oak, they are allocated with high strength characteristics.
There is no universal effective way for all cases therefore specialists recommend to use consistently everything stages of works. For a start it is possible to try to remove paint and varnish layer by means of the normal palette. If the previous coloring was carried out with observance of all production requirements, and primer has been applied on surface, then there will be quite enough mechanical way. In conclusion it will only be required to finish basis by means of abrasive paper with average size of grain.
If the palette does not help, in such cases it is possible to use the grinder which will allow to reduce layer of old covering significantly. The surface is processed until the wood texture begins to be shown. If it does not help, the wall is processed by solvent or special remover. Means is selected under type of dye which needs to be removed. Only in this case it is possible to expect efficiency. At the end the surface is smoothed out by abrasive paper.
How to choose paint on odourless tree to destination
Paints differ among themselves not only as basis (binding substance), but also to destination. From that how correct will be the choice, the healthy microclimate indoors depends and whether the covering will be able to meet expectations.
To keep the natural invoice not to do without use of lessors paints for tree for internal works. These transparent structures will emphasize natural beauty of wood pattern. Water-based environmentally friendly dyes will help to give necessary shade to surfaces.
This type of structures can be used for processing of the following objects:
- windows and frames;
Recommendations about use of paints in different rooms
If the building is completely executed from bar and there is no opportunity to execute covering of surfaces by means of other finishing material, it is better to use acrylic paint for tree for internal works. This type of covering is capable to disguise visually roughnesses and errors on walls and also to provide high flow capacity. Thanks to access of air to wood premises remain comfortable and dry. Use of acrylic paint for finishing of imitation of bar is allowed.
For children’s rooms it is better to pick up easily washed away paint on acrylic basis which can execute full coloring of walls or to create the drawing by means of cliche. The structure has to be checked very carefully, presence of hazardous substances negatively will affect health of the child. Therefore it is necessary to approach the solution of question what paints draw on walls of children’s rooms thoroughly.
Helpful advice! Marking of “Eco Label” marks environmentally friendly products. Dyes with this tag can be used safely for finishing of the children’s room.
Acrylic and latex structures will be suitable for bathrooms and kitchens, as well as rubber paint for floor on tree. The main thing that at their structure there were antifungal components. For kitchens it is more preferable to choose the mixes forming the covering differing in simplicity of leaving. It is desirable that from its surface greasy spots and dirt were easily washed away.
Such rooms as the hall and corridor are characterized by high passability. Therefore all surfaces are exposed to serious mechanical loadings. For their finishing it is recommended to use acrylic-latex structures with resistance to abrasion.
Economic rooms in houses also need leaving. As finishing material it is better to use dyes of the budgetary category, for example, vinyl or acrylic paints for tree for internal works here. In zones where washing or drying of linen is carried out, the same structures, as are applied to kitchens and bathrooms.
Features of acrylic decorative paint for interior finish of walls, ceiling and floor
Acrylic structures belong to the category of water dispersible paints for walls and ceilings and also floor. Under each type of surface certain type of covering is selected, walls and floors are exposed to heavy loads, than ceiling. Most often at the heart of such dyes there are ethyl, methyl and butyl polyacrylates. In certain cases producers use copolymers of the specified components which are responsible for film formation.
Acrylic paints on tree for floor, ceilings and walls have similar structure:
- 30-40% water solvent;
- the painting particles from 4 to 20% (pigments can be provided by zinc white or dioxide of titanium);
- fillers from 30 to 40% (particles of cellulose, talc, chalk, the crushed marble crumb);
- substances in the form of air, alcohols, alkalis of 2-4%;
- antiseptic components;
- preservatives and plasticizers.
Structures of this category are divided directly into acrylic paints for floor on tree and styrene – acrylic dispersions. They are elastic, vapor permeable also show resistance to moisture influence.
Interesting fact! The latex paint on acrylic basis is capable to sustain prior to 5000 procedures of washing. At the same time to remain its external attractiveness and brightness of shade.
Features of paints of Tikkurila for tree for internal works
The Tikkurila producer releases luxury finishing materials, according to their cost it is impossible to call low. Therefore some consumers think whether it is worth buying such paints or it is better to pick up something else.
The most popular dye in assortment of this producer is “Harmony”. This type of structure has excellent qualities, it is very simple in use, and as a result of coloring the qualitative and beautiful covering turns out. Undoubted advantage is also the lack of caustic substances, than other mixes cannot brag. In the course of coloring and at further operation of the room, the probability of harming human health is excluded.
Harmony paint is applied mainly to walls and ceilings. The structure has three options of packing.
One more option of dye for floors – “Betolux”. Is suitable both for concrete, and for wooden surfaces. This type of covering has specialized assignment for floor therefore the producer has allocated it with resistance to heavy loads of mechanical type. About 90% of paint and varnish products of the market significantly concede to this structure. Despite high technical characteristics, covering it turns out not only practical, but also esthetic.
The covering perfectly pushes away pollution. Use for finishing of floors in children’s rooms is allowed, the structure is absolutely safe and eco-friendly.
Specifics of alkyd paints for tree for internal works
Unlike acrylic structures varnishes form basis for creation of alkyd paints. They represent combination of pitch of stiff consistency, glycerin, rosin and vegetable oils. At structure there can be also other components giving to dye special characteristics. Drying of alkyd enamel requires about 2-3 days.
Advantages of alkyd coverings:
- long life cycle;
- water resistance;
- affordable price;
- resistance to mechanical influence;
- protection of wood against putrefactive processes.
All these properties do alkyd paint by optimum finishing material for processing of floor.
Helpful advice! If dye on alkyd basis has thickened, for dilution of mix it is better to use special purpose solvent on organic basis. White spirit will be suitable for these purposes.
The Euro Pesto 30 alkyd enamel from Tikkurila producer is intended for rooms where coverings are exposed to high loadings, for example, the frequent procedure of washing. Dye is suitable for wood and metal. Use even for finishing of radiators is allowed.
Features of paints just for decoration from odourless tree
Most often for production of furniture wood is used. Over time in use the paint and varnish layer on material is erased, on surface scratches, chips and cracks are formed. But it is not occasion to throw out favourite chair or cabinet. Updating of paint and varnish layer completely solves this problem, besides allows to update design of subject and interior of the room in general.
For the similar purposes the following types of dyes are usually used:
- water emulsion structures on latex basis;
- silicone water emulsion.
The most demanded of them are acrylic structures.
Opportunities and properties of acrylic paints just for decoration from tree
The increased popularity of dyes on acrylic basis is caused by several factors. First of all ‒ it is safety, the short period of drying and fire safety. The covering is capable to minimize damage which can receive the room as a result of accidental ignition. In addition, paint has good adhesive properties and perfectly lays down on surface from wood or the materials made on its basis.
Use of acrylic paints just for decoration made of the following materials is allowed:
- oriented strand board;
- wood-shaving plates;
- medium density fibreboard.
Basic color of acrylic dyes – white. By means of color which can be got or added in shop the light basis can give any shade. The majority of quality dyes contain antiseptic substances in the structure. Thanks to it wood damage probability is excluded by fungi and mold therefore product life cycle lasts.
Helpful advice! If to buy acrylic paint with water-repellent and dirt-resistant additives, after its use it is necessary to carry out much less often cleaning of the furniture made of tree.
Features of aqueous emulsion inks for walls: how much are structures, their types
Water emulsion dyes have liquid consistence. At the expense of it the protecting cover turns out reliable, the structure is capable to get deep into wood. At the heart of mix there is water, coloring pigments and binding substances. In addition, at structure there are fillers providing fast drying of paint, moisture resistance of covering, etc.
For dilution of dye solvent on organic basis is used. White spirit for these purposes is optimum. The covering dries 2-6 hours later after drawing. On sale several kinds of emulsions therefore it is recommended to study carefully information placed on packaging meet.
Kinds of structures for whitewashing of walls aqueous emulsion ink the hands
Aqueous emulsion inks for processing of wooden surfaces are provided by structures on the basis of polyvinyl acetate and latex.
In the first case, polyvinyl acetate or in other words, white glue forms basis for production of material. He acts as binding substance. This type of dye is well combined with wood. Drying happens in 3-4 hours, at the same time on surface the semi-gloss film covering with porous texture is formed.
In the second case producers use styrene butadiene polymeric connections. At structure there are fillers and coloring pigments. Process of coloring is very simple also comfortable, mix is applied easily and has no unpleasant smell. Unlike the previous option mix is delivered in the form of paste which needs to be diluted with water before application.
All dyes listed in article are made on the basis of environmentally friendly raw materials. Before painting of the room, it is necessary to pay attention to what paints have no unpleasant smell and have wide color range. By means of such structures it is possible not only to experiment with design, but also to receive beautiful reliable covering which will protect wooden surfaces from mechanical loadings and also negative impact of moisture and microorganisms.