Table of Contents
Important role in registration of kitchen is played by the place between table-top and hinged cabinets which is called apron. According to traditions it is quite often covered with ceramic tile, but in the modern world new materials and ways of dressing, in particular – wall panels for kitchen have appeared: the apron thanks to them can take different exterior. What types of material happen, their features, rules of installation and operation will be told by this article.
What has to be practical and beautiful apron of kitchen
The kitchen takes the important place in the apartment or the house as here practically all members of household spend much time. Therefore it is necessary to approach registration of this room with special responsibility. Important element in creation of beautiful and practical decor plays apron – it is part of wall in work area, subject to different tests in the form of pollution, to temperature drops and humidity. Correctly picked up protecting cover of apron will help to keep kitchen clean, and the general interior will make more esthetic and cozy.
Earlier the apron was trimmed generally with tile. The ceramic tile remains in trend also today, but on row with it new various materials, in particular wall panels on kitchen have appeared. The photo of various options can be found in the Internet and in any hardware store. What material would not be chosen, the main thing that it was steady against temperature drops, humidity, easily washed and, thus, conformed to the following requirements:
- easily gave in to washing and cleaning;
- maintained negative and aggressive impact of abrasive cleaning agents;
- had the high level of moisture resistance;
- differed in high shock resistance;
- maintained temperature differences;
- differed in esthetic characteristics;
- it was perfectly combined with complete kitchen and fitted into the general stylistics of kitchen.
To the list of practical characteristics almost completely there correspond wall panels for kitchen. The photo of the aprons issued in this way clearly demonstrate excellent esthetic characteristics of this type of materials. Especially as the modern market offers wide range of products.
Wall decorative panels for apron: features and advantages
Thanks to the fact that wall panels conform to all requirements of practical apron this type of finishing became very popular. Besides, it possesses the wide list of advantages which nominate him to the first place in respect of practicality, profitability and esthetics.
Helpful advice! Panels in kitchen use not only as wall covering in apron zone. With their help it is possible to close uneven ceilings and walls, to hide communications and other defects.
Specialists carry the following to the main positive characteristics of wall panels:
- Ease and speed of installation. The surface does not demand special preparation for material placement. Process does not demand availability of special tools and certain practical skills.
- The multifunctionality of material is that they perfectly absorb sound and do not pass heat.
- Masking by means of panels allows to hide wire and cable. At the same time it is not obligatory to submerge them in wall and to cover with plaster that needs to be done when using tile.
- Practicality of wall panels. Kitchens with such apron do not demand special leaving and frequent washing, special cleaning agents are also not required.
- Profitability. Installation of panels costs much more cheaper, than facing by tile or decorative painting.
- The wide range of material allows to choose the necessary option, proceeding from practical and other requirements.
- Esthetics. Wall panels for interior finish of kitchen will help to make the general design beautiful and unique.
- The high heat stability and moisture-proofness is provided by special covering on panels which pushes away water and is not deformed under the influence of steam.
Types of wall panels: variety of materials, forms and sizes
In production of wall panels various materials are used, also distinguish them in form and the sizes.
In the construction market it is possible to meet products from:
- polyvinyl chloride or PVC;
- wood chipboards special coated different look;
- wood and fiber sheets or MDF, covered with film;
- gypsum cardboard;
- the laminated plywood;
- artificial stone;
- glass which can be multilayer, tempered, mirror, with the image or the invoice.
Glass panels still call skin. At material selection it is necessary to be guided by temperature restrictions and not to establish over plate material with the low level of heat resistance.
Among panels on kitchen apron most often choose models of such form:
- Rack which have the form of levels with width from 10 to 50 cm. Normally it is inexpensive panels from plastic. Rails among themselves connect thanks to special grooving connectors, and fasten on wall by means of furring.
- Tiles have appearance. They are released in the form of squares or rectangles, with different length of the party. The tile for the wall panel for kitchen acts generally as analog substitute from ceramics.
- Sheet products are integral plates of oblong shape. Such look is considered the most widespread and practical. Plates have different width, and their length can reach three meters, thus, one leaf can cover volume part of wall in several square meters.
Plates are also distinguished on way of fastening: they can be fixed on furring from simple levels from tree, metal section, or just to glue directly on wall.
Helpful advice! Wall panels – great option for the beginning masters who independently do repair in kitchen. For their mounting it is not obligatory to remove old wall-paper or paint, it is ideal to level wall and to employ professional masters.
Features of plastic wall panels for kitchen
Plastic plates have appeared for a long time, practically since the invention of the material. Modern models differ in the increased durability, thanks to the updated chemical composition on the basis of polyvinyl chloride, but in too time they considerably lose to other materials because of the low durability and thermal stability.
The main advantage of look is low cost, the broadest choice of products and also simplicity of mounting of design. Thanks to this material it is possible to solve the mass of problems in kitchen and in other rooms. Refer their smoothness and density to positive characteristics. Levels from PVC do not absorb moisture and do not miss couples therefore do not accumulate smells and do not contribute to the development of fungi and bacteria. It is easy for slats to clean, using any cleaning agent.
The main properties of PVC plates it is their ease and flexibility. Release wall panels for kitchen from plastic of the different sizes. In width of strip can reach 50 cm, and in length – to 3 m. They can be established on ceiling, walls and in the form of apron. The exception is made by zone near the furnace or cooking surface as at influence of high temperatures of plastics it is deformed. Except that plastic easily is exposed to mechanical influences, on it there are scratches, and white plates turn yellow over time.
How to choose and how to fix the wall panel for kitchen: apron from plastic
The driven plastic products mount by installation on furring from wooden levels. At the same time the distance between fixing rails is calculated at the rate of weight and width of PVC plates. If the rail thin and soft, then interval between fastenings is less. On each side parts connect by means of grooving connectors. From above the design is also covered with plastic monophonic profile.
Helpful advice! For creation ideal and in too time of the budgetary interior in style the loft, it is possible to use plastic panels under brick. It is possible to cover with material not only apron, and and one of walls of kitchen.
As apron it is possible to pick up the necessary option of wall levels which have different texture and coloring. Even inexpensive plastic panels in kitchen can perfectly simulate colored boards, marble or the rough invoice of wood. On textural characteristics the plate can have both smooth glossy, and opaque surface in the form of crude board, decorative plaster or roughness of stone.
Variety concerns also shades. They can be picked up according to style registration of the room. For example, in style Provence the rails with impressive or opaque surface imitating colored board will perfectly look. The levels imitating the varnished wood will perfectly fit into style of country. In the kitchens stylized under classics it is better to refuse PVC plates as this direction does not suffer artificial materials, and here in modern interiors they are quite appropriate.
Wall panels for kitchen from MDF: characteristics and advantages
Excellent alternative to panels from plastic there can be products from MDF. Their feature consists in commonality of the sizes. Dimensions of plates from the producer make: 244kh 60kh 4sm. The MDF panel can be with painting, lamination and is covered with interline interval.
Fiber board of average density with abbreviation of MDF is produced by hot pressing of fibers of wood. In the course of production do not apply the glue structures distinguishing toxins. Particles in the middle of material connect among themselves at the expense of pitches which are emitted when heating. Thanks to such feature, plates from MDF are considered as harmless therefore are subject to installation as in the worker, and lunch zone, bravely for health.
Other advantages of the MDF wall panels to kitchen consist in the following characteristics:
- environmental friendliness of material;
- low cost;
- ease of processing;
- moisture resistance;
- shock resistance;
- simplicity of leaving;
- variety of models;
- possibility of drawing photo printing;
- ease of mounting.
On plates from fiber boards the beautiful and stylish interior allows to have opportunity of drawing photo printing, using wall panels for kitchen. MDF aprons most often release with abstract drawings, table subjects and still lifes.
Shortcomings are also available for the MDF panels:
- plates cannot be established over plate because they do not maintain high temperatures;
- at panels exterior not natural;
- the photo printing looks worse, than on natural wood or stone.
Mounting of plates of MDF happens by fastening on special furring. Such installation allows to disguise electrical wiring or vent system.
Wood-shaving wall panels for kitchen: apron and table-top
In kitchen such material as wood chipboards or chipboard enjoys wide popularity. They are used as parent material for creation of complete kitchens, table-tops and wall panels. For kitchen is more practical to use not classical sheets chipboards, and the laminated plates.
Normal wood chipboard represents the pressed shaving impregnated with acrylic glue with covering from paper or thin film. The paper surface from moisture and steam is quickly deformed and inflates. At the laminated models the top layer imitating tree or stone consists of transparent layer of polymer which serves as excellent protection for paper covering, prevents soaking and resists to mechanical influences.
It is interesting to know! The last invention as panels for kitchen – HDF plate. It is the MDF sheets with the increased durability. They differ also in variety of decorative coat, but are a little more expensive than classical analogs.
Thus, the laminated plates from chipboard or MDF have such additional positive properties:
- moisture resistance;
- long life cycle;
- broad model range with various subjects of covering;
- wide choice of the sizes of the wall panel for kitchen that allows to pick up the necessary option taking into account expected surface load.
Panels cut out independently, having chosen the necessary form and dimensions. Edges should be closed special tape. It is pasted under the influence of high temperature. If not to close cuts, then they will become the great place for moisture penetration that will lead to deformation and stratifying of material.
Broad use of the laminated wall panels
Laminated coverings and variety of the sizes and decorative registration of surfaces allows to establish to feature cloths, both in vertical, and in the horizontal direction on certain square. Therefore, quite often they are chosen as covering for table-tops and aprons on kitchen. Photos clearly demonstrate harmony of such interior. Most beautifully models, both identical color, and contrast tones look. The main thing that in such duet the texture and texture of material was identical.
Mounting of the laminated panels, as well as models from pure chipboard, comes by fastening by means of special hooks on framework from metal. The basis has to be reliably recorded on wall as sheets of the big size and thickness can have big weight and there is threat that they will fall from own weight.
The laminated panels with plastic layer of decor where polymeric PVC covering serves as substitute to film from paper are especially popular now. There is set of options of finishing layer. It can be both the glossy, and opaque surfaces, both monophonic and impressive models imitating wood, metal, stone, leather, mosaic laying. For example, the wall panel under brick for kitchen will become excellent alternative to ceramic tile.
Characteristics of the wall panel for kitchen from glass
The wall panels from glass called in the construction world as skin lately enjoy special popularity. These are integral plates from normal or red-hot glass. Models from simple glass, as a rule, two-layer on wood-shaving or film basis. It is necessary to consider that such sheets cost not much, but at the same time differ in the increased fragility. Plates from red-hot glass much more expensive, but they stronger and perfectly transfer influence of high temperatures.
Mounting of skin happens in the seamless way by their fastening on special heads. Therefore before fixing the wall panel for kitchen, it is necessary to prepare basis on wall. Care of the glass panel is quite simple thanks to lack of seams. For this reason such panels make by the individual order under the specific sizes of apron.
Helpful advice! If there is task to create bright and practical background on working wall, then skin with photo printing will help to cope with it. Therefore you should not neglect quality and to refuse such option because of the high cost of finishing of a such type.
Glass panels in kitchen have number of specific advantages:
- the high utilization properties in the form of moisture resistance and heat resistance allowing mounting of skin both over washing, and over cooking surface;
- plates do not absorb smells, do not fade;
- simplicity in leaving and hygiene;
- uniqueness of each model and faultless exterior.
Originality and variety of glass wall panels on kitchen
Perhaps, the main advantage of skin consists in wide choice of design registration. With their help even the small and gloomy room as correctly picked up panels will help to broaden visually the room will instantly change and to give it additional light.
The glass wall panel with photo printing for kitchen thanks to protective layer throughout long time will keep the presentable look. Such apron will give to interior of modern kitchen of uniqueness, luxury, will fill it with light and will create excellent mood.
Under heavy-duty glass covering there is decorative layer which can have such basis:
- mirrors with patterns and drawings;
- the delustring basis;
- photo printing;
- 3D – the image.
The version of panels, most popular in this list, with photo printing. For example, the glass apron with the image of juicy berries and fruit will give to the room of optimism and warmth.
The monophonic panel of dairy color will perfectly fit into white set in combination with the dark equipment. In white kitchen the photo printing with the image of the night city will perfectly look. Purely black panel will give to severity to interior, and the bright apron — will lighten the mood. The image of flowers will create the spring atmosphere in kitchen, and sea landscapes will have to rest.
The kitchen panel from tree and metal: options for magnificent interiors
As kitchen panels also natural materials in original state are used. For example, the covering can be made of wood which is used in the form of boards and plates which make from array not of valuable technical breeds, and as covering serves the interline interval of expensive breeds.
Sheets of this kind can be established on big surface, giving it solidity. The effect of seamlessness is reached thanks to special feature connectors in the form of grooves and ledges on plates. Establish panel decorative board for kitchen in the same way, as well as apron from wood-shaving material.
Giving preference to wood, it is necessary to consider that this material is characterized by instability. For example, at influence of hot air the tree can dry that will entail cracking, and at influence of steam and water – to inflate. Therefore you should not use facing from natural wood behind sink and cooking surface, in zone of arrangement of the electric kettle or crock-pot.
Helpful advice! Those who cannot refuse completely magnificent panel boards should exclude their installation in cooking zone. For the purpose of practicality of plate from wood it is possible to combine with ceramic tile or skin behind washing and plate.
Metal panels on working wall it will be perfectly combined with set facades in the same cool silvery color. Such combination is appropriate in style the loft and hi-tech. Mounting of plates from metal comes by installation of panels on rails from plastic. In work with tree and metal special purpose tools and skills therefore it is better to entrust work to experienced masters are necessary not to spoil expensive material.
The best version of panels for apron are skin or the laminated plates. Application of artificial stone will be justified in case of availability of necessary funds for their acquisition and installation. Mounting of panels from plastic can be carried out the hands, in other cases it is better to involve specialists. Correctly picked up and installed wall panels will help to create unique, cozy and practical interior in kitchen.