What paint for tree for outside works is better: main types of structures

What paint for tree for outside works is better: main types of structures

Table of Contents

This article will help to define what paint for tree for outside works is better taking into account the main criteria of quality. Let’s in detail consider comparative characteristic of the oil, acrylic and alkyd, rubber structures used for wood processing: their advantages and shortcomings, operational and technical parameters, properties, the rating of the best dyes from popular trademarks and also average quotations.

What paint for tree for outside works is better: covering as protection

Wood is considered traditional construction material for construction of houses. Thanks to special characteristics this type of raw materials provides construction with beauty, ecological purity, heat and comfort. But as any other material of natural origin, tree needs additional protection.

The qualitative protecting cover performs several functions at once:

  • allows to prolong operation term, both the material, and all construction;
  • excludes emergence of cracks and deformations;
  • allows to disguise loss of natural color of wood;
  • gives the chance to give to construction of necessary shade;
  • allows to diversify design;
  • protects material from negative impact of external factors;
  • prevents reproduction of mold, fungal dispute and the microorganisms destroying tree.

Therefore the question of the choice of the best paint on tree is extremely important for outside works. For external finishing of the building structures on different bases are used. Also alkyd enamels are most often applied acrylic, oil, rubber. Each of the listed types of covering has own useful properties and shortcomings. The overview and comparison of characteristics will allow to be defined what most optimal variant is suitable for these or those purposes.

How to choose the best exterior paint on tree

Under the influence of the atmospheric phenomena external attractiveness of wood is lost, there are cracks and the moss, fungus and mold begin to develop on surface. If correctly to pick up paint for tree for exterior finish it is possible not only to prevent destruction and damage of material, but also to disguise effects which became result of this negative impact.

Helpful advice! For additional protection specialists recommend to process before coloring wooden surface antiseptic.

The quality paint and varnish coating providing reliable protection has to have the following properties:

  • pushes away moisture that allows to prevent hit of liquid in deep layers of material;
  • protection of surface against microorganisms which lodge in structure of tree;
  • scaring away of the insects capable to do harm to wood;
  • prevention of overdrying under the influence of direct sunshine with the subsequent emergence of cracks;
  • resistance to abrasion;
  • maintaining decorative characteristics.

Antiseptics as basis under masonry paint for outside woodworks

Antiseptic structures are characterized by high penetration capability. Sometimes means is capable to get of depth up to 0.7 cm. At the expense of it the elements made of wood receive the reliable level of protection against putrefactive and mold defeats and also natural factors.

Antiseptics happen two types:

  1. lessors.
  2. Cover.

In the first case the covering has transparent structure thanks to which the natural coloring of wood and also its natural pattern is emphasized. Cover antiseptics has one more name – opaque. This type of covering completely hides the wood drawing, but keeps its texture. If it is difficult to be defined with what paint to paint tree not to spoil its exterior, it is possible to be limited to use of lessors antiseptic which will keep natural beauty of material.

Main functions antiseptics:

  • giving of antiseptic properties of surface;
  • protection of material against influence of the atmospheric phenomena (winds, rainfall, ultraviolet rays);
  • prevention of reproduction of decay and mold;
  • dressing of surface (cover structure);
  • creation of transparent covering (lessors structure).

Features of oil paints for outside woodworks

As the main components of oil dyes producers use the painting pigments and binding substances. Drying oil – the most widespread component applied to sheaf. As the painting pigment mineral powder in the form of small dispersion most often acts. Its particles cannot be dissolved in binding substance. Such effect is reached because mineral powder is much heavier than the main component.

Before buying oil paint for outside works, it is necessary to pay attention to such nuances:

  • volume of film-forming substances;
  • presence of volatile components;
  • granularity degree;
  • dye consumption;
  • covering hardening degree;
  • water repellency.

Helpful advice! Particles of mineral powder quite often accumulate at the bottom of banks in the form of dense deposit. Therefore it is recommended to mix carefully before use of dye capacity contents. This requirement concerns also other structures.

Criteria for selection of qualitative oil paint for outside works

In addition to binding substances and pigments, as a part of dye there are also other components which quantity has to be strictly rated. For example, the share of film-forming substances has to exceed 25% of the total amount of mix. The this percent is higher, the will longer serve covering. However large number of film-forming components reduces time during which solution keeps the suitability after capacity is opened. In other words, the opened jar with dye cannot be stored throughout long term.

Before buying paint for oil-based tree, it is necessary to pay attention to presence of volatile components at structure. Minimum safe amount of these substances in solution makes 10% of total quantity of mix. These components are toxic and bear danger to human health. Evaporation of volatiles begins at temperature from +20 °C. For this reason it is necessary to use means for protection of airways or to carry out coloring of surface at lower temperatures.

At granularity less than 90 microns on the processed surface are formed smooth covering. If it is required to receive protective layer with pronounced roughness, it is necessary to buy paint for tree for outside works with grain of larger size.

The consumption of paint is influenced by such properties as flowability, time of hardening and viscosity of structure and also porosity of material. At quality mix the indicator of viscosity is in limits of 65-140 units. At the same time, the term of drying should not exceed 48 h. The durability of covering depends on hardening degree of film formation. The this indicator, the better is higher. Water repellency level at dyes for outside application has to be 100%. To structures for internal works more sparing demands are made.

Properties and characteristics of oil paints on tree

At the heart of oil dyes there is drying oil. And this component can have both natural, and artificial origin. The structure of structure allows to give mixes practically any coloring.

Important! Oil coverings are not combined with acrylate paints on tree for outside works and other kinds of structures. Therefore for recovery of paint and varnish layer on the wooden building it will be required to use the same kind of finishing or to completely delete old covering.

Properties of oil-based dyes:

  • high level of adhesion with the wooden surface pretreated by means of drying oil;
  • full drying of covering requires a lot of time (from 24 to 48 h) therefore to prevent sticking of dust on freshly painted surface, finishing work should be carried out when on the street there is no wind;
  • low degree of resistance to ultraviolet therefore the covering can quickly lose gloss and saturation of color therefore it is recommended to choose white exterior paint on tree or oil structure of light shade;
  • the maximum life cycle of covering makes 6-7 years and less, on condition of influence of large number of adverse factors.

The approximate consumption of dye makes 100-150 g/m ².

Features of alkyd paints for tree for outside works

The main component of these dyes is alkyd varnish. It is pentaphtol and glyptal. The first option is applied to production of structures of household purpose. Such varnish represents dense pitch which is diluted by means of solvent. As a part of this mix as additional substances there are oils, rosin and glycerin.

As filler there can be particle torments crushed to state:

  • sand;
  • marble crumb;
  • granite crumb.

The coverings created by alkyd paints are long-lasting and elastic. The painted surface quickly dries. Most often for this purpose from 6 to 12 h are required. For the period of drying the ambient temperature and degree of air humidity influences. During operation the paint and varnish layer is not exposed to fast burning out and does not take seat.

Pay attention! Producers of alkyd paints leave marking which indicates properties of structure and its assignment on bank. For example, marking of PF-115 demonstrates that at production pentaphtol varnish is used. “1” at the beginning of digital value points to outside application, and number “15” is the code of dye in the catalog. Mix PF-115 is intended for coloring of metal and wooden surfaces. It forms glossy layer.

Marking of alkyd dyes:

The firstProperties of dye
0grounding enamel
2internal finishing work in rooms of the heated and not heated type
3creation of temporary seal on the equipment (conservation paint)
4high levels of water resistance and hydrophobic properties
5paints of special function (structures with luminescence, coverings for scaring away of small rodents)
6resistance to influence of gasoline and oils
7resistance to hostile chemical environment
8thermal stability
9conductivity or electrical insulation

Advantages and shortcomings of alkyd paints for tree

Let’s consider advantages of structures on alkyd basis:

  • low price;
  • resistance to negative atmospheric influencing factors;
  • broad temperature range (from-50 to +60 °C);
  • wide choice of coverings with different effects (semi-gloss, opaque, glossy).

If there is choice what paint to paint wooden fence, it is better to give preference to glossy structure. This type of covering is ideal for outside finishing work. The alkyd dyes creating glossy covering on surface are capable to serve of 20% longer, than other options of structures of this category. The consumption of dye makes about 150 g/m ².

Shortcomings of alkyd dyes:

  • structures have high rate of combustibility therefore for the purpose of fire safety it is not recommended to process them buildings, it is better to be limited to fence, arbor, bench;
  • low degree of tendency to impact of the alkaline connections which are contained in rainfall;
  • in use the fragility of covering increases, it is tarnished, cracks and yellow shade appear;
  • mixes cannot be carried to environmentally friendly materials;
  • the unpleasant smell of dye remains until the covering fully does not dry;
  • the maximum term of operation of covering under the sparing conditions is 5-6 years.

Shortcomings as at oil, and alkyd structures there is a lot of therefore most of consumers prefers to buy acrylic paints for tree to receive better and ecological covering.

Features of acrylic paints for tree for outside works

Dyes on acrylic basis represent water-soluble structures of synthetic origin. They include qualitative acrylic emulsions of polymeric type. These elements are interlink between others paint components – water and pigments. In addition, producers add other components intended for improvement of stability of utilization properties of emulsions during long storage.

Important! Water-based acrylic paint for tree is strictly forbidden to be stored in conditions of low temperatures.

When dye stiffens, on surface the thinnest film layer having high adhesive properties is formed. Thanks to this elastic covering, the painted surface is reliably protected from aggressive external influence. Decorative characteristics of structures are caused by presence of coloring pigments.

Whether it is possible to paint with acrylic paint tree on the street

Taking into account artificial origin of dye there is relevant question of compatibility of this finishing material with the products from natural wood operated in street conditions. A number of the advantages inherent in structures on acrylic basis has made them optimal variant for these purposes. And these mixes are considered not only as the best paints for facade walls, but also for other objects made of wood.

Such paints have large-scale of resistance to influence of the atmospheric phenomena including ultraviolet rays. Therefore the covering will keep the initial color throughout long time. Hydrophobic properties and high steam permeability are inherent in film covering. As the result, paint well pushes away water, but at the same time does not block access of air to wood.

Wood under the influence of moisture and the sun is exposed to deformation changes. Thanks to elasticity, the covering keeps the integrity. At shrinkage of the building, influence of high humidity or temperature differences it is not coated cracks. The covering ability is also high. Two-layer coloring gives equal covering even if drawing is carried out on dark basis.

Water-based acrylic paints for tree differ in ecological purity. They have no unpleasant smells therefore are perfectly combined with wood. Cultivation of structure to the necessary consistence the tinting of basic mix does not cause special difficulties, as well as. Nevertheless, it is better to entrust the procedure of addition of pigments to the professionals using computer technologies for these purposes. Paint quickly dries therefore finishing of facade does not take a lot of time. As a result the long-lasting covering which is not required to be tinted often turns out.

Shortcomings of acrylic exterior paints on tree

Structures on acrylic basis practically have no essential shortcomings. There is only number of restrictions which need to be considered during coloring.

Helpful advice! The choice of coloring influences insolation level. White paint for tree is recommended to be used in hot regions as this shade reflects sunshine. Other colors of light gamma also will be suitable for these purposes. For places with frigid climate it is better to select the dark options of finishing absorbing light.

To execute high-quality coloring, it is recommended preliminary to perform calculation of necessary amount of paint. Most often producers point to tanks approximate flow of paint which is measured in liters or grams on m ². This indicator for acrylic paints has the big range of variations – from 130 to 200 g/m ².

Each subsequent layer is put only after previous has fully dried. Otherwise, the covering will turn out thick, inaccurate and can float. Many little-known producers try to attract buyers with the low price of acrylic paint to tree. However it is better to give preference to the reliable and checked brands. Quite often low-quality structures change color after drying or quickly lose the qualities.

How to calculate consumption of acrylic paint for external woodworks

The consumption of dye depends on porosity of wood which will be exposed to coloring. For example, sawn wood has the high absorbing ability therefore at primary causing acrylic structure the expense can be big. Coloring of slicewood is followed by smaller expense. If the construction facade already has old paint coat, this indicator considerably will decrease.

Recommendations for predesigns:

  • if multilayer coloring is supposed, then each subsequent putting paint will be followed by lower expense, than previous;
  • if to dissolve ready acrylic mix with water in the ratio 1:1, this solution can be used as preparatory primer, having created at the same time shaded background (if the budget allows such expenses);
  • the necessary amount of dye is calculated taking into account the area under painting and expense on 1 m ²;
  • it is recommended to add 5% as reserve stock to the received result.

Features of rubber paints for tree for outside works

The rubber or latex paint is one of modern options of finishing of wooden surfaces. Technical and utilization properties of this material in many respects exceed indicators of other paint coats. As a part of rubber dyes components, similar to acrylic mixes, acrylates and water contain. However degree of quality of latex coverings is much higher, thanks to the innovation developments used in the course of their production.

Let’s consider all advantages of rubber structures:

  • environmental friendliness;
  • safety for human health;
  • there is no need in use of individual protection equipment during coloring;
  • high strength characteristics;
  • resistance to influence of aggressive environmental factors (rainfall, ultraviolet rays, wind loads, pathogenic microorganisms, temperature differences);
  • excellent protective properties;
  • good steam permeability;
  • elasticity.

Pay attention! The surface with latex coloring can wash with the solution having alkali in structure.

After the structure dries, on surface the velvety and strong film covering forms. Latex dye has the pleasant invoice. The covering perfectly stretches therefore on surface cracks are imperceptible. The price of rubber paint on tree for outside works is the only essential shortcoming. Therefore the most demanded in the market are acrylic structures having more available cost.

Main types of wearproof paints on tree for outside works

MA-15 Dekart paint is the bright representative of oil-based traditional structures. Concerning wear resistance it has average parameters. On condition of observance of all rules of drawing, the maximum term of operation can reach 10 years. The budgetary cost, among shortcomings – difficult procedure of removal of outdated covering for finishing updating belongs to advantages.

Polyurethane paint Color plastic differs from Glims Pro in high rate of wear resistance. It perfectly proves at low temperatures, is steady against ultraviolet and negative atmospheric actions. This type of dye belongs to structures of universal assignment. Life cycle of polyurethane paint – more than 10 years.

The Deols alkyd enamel has wide color range. It is steady against atmospheric factors of influence and well pushes away moisture from surface. Long presence of unpleasant and pungent smell – the only minus.

Acrylic paint of Terraco completely conforms to requirements of modern builders. Quotations on purchase of structure are on average segment. At the same time dye is suitable for universal application.

The rating of paints on tree for outside works: descriptions, responses

The dyes intended for protective and decorative processing of wood are very popular among consumers and are presented at the market in extensive assortment. The offer includes different price categories and levels of quality. Brands of Finland (Tikkurila, Teknos), Canada (Forester) and Germany (Dufa) are recognized as the best.

The Finnish paints on tree for outside works of Tikkurila

The Finnish company Tikkurila is the indisputable leader in the market of paints and varnishes. Alkyd-urethane and polyurethane-acrylate structures are considered as the best dyes of brand.

Helpful advice! For additional protection of wood it is possible to use antiseptics of Tikkurila. These structures are allocated with the fungicide, insecticidal and biocidal properties protecting at the same time both from insects and from fungus, and from microorganisms. At the same time antiseptics it is completely safe for the person.

Water emulsion dyes are developed especially for the severe weather patterns characteristic of the northern countries. Therefore structures perfectly maintain climatic loadings, influences of mechanical property, intensive influence of the sun and rainfall. On condition of observance of the three-stage scheme of coloring the covering is capable to serve more than 10 years. Such system assumes preliminary putting primer and two-layer processing by the painting structure.

The consumption of dye depends on texture of the processed surface. On equal coverings of 1 l of structure there are enough for coloring from 9 to 11 m ². On rough surfaces the same volume covers about 4-6 m ² the areas.

Popular series of paints of Tikkurila for tree for exterior finish

According to the stated characteristics dyes of the Pika-Teho series differ in durability and elasticity. On condition of observance of all requirements of technology of drawing this type of covering is capable to provide to facade effective protection for 6-7 years. For tinting of basis 120 shades are used. After drawing on surface there is no smudge left. Drying-out of one coat of paint requires about 2-4 h.

Advantages of dyes of series the Ultra Classic consists in firmness. Process of the deformation changes proceeding seasonally in wood does not affect external characteristics of covering in any way. The strong and elastic layer is capable to sustain repeated stretching. Even as a result of impact on gap at covering all initial properties remain.

Thanks to binding component in structures the Ultra Classic semi-gloss gloss of covering remains throughout all operational term. Finishing is capable to serve more than 7 years. For drying of mix after drawing it is required only 1 h. Dye well lays down on surfaces which were already exposed earlier to coloring. Excellent compatibility with the impregnated wood.

Structures of the Teho series dry much more slowly, on it 24 h leave. However it is impossible to call it shortcoming. Throughout all this time the covering forms good hitch with the processed surface and impregnates upper layers of wood. In use finishing becomes opaque. Emergence of similar effect demonstrates that the covering is exposed to gradual destruction. The term of effective service of dye is 5-7 years.

Pay attention! On condition of suitable temperatures drying of paint happens in the time established by the producer. If on the street there is wet weather, this process can be increased up to 30-40 h.

Characteristics of paints of Tikkurila for outside woodworks, responses

Optimum characteristics of structures have provided them such high popularity among consumers. Tikkurila well proves on any wooden surfaces. The major characteristic is the covering ability and in case with this Finnish dye this indicator completely conforms to high requirements of system of standards of the European level.

Main characteristics of dyes of Tikkurila:

CharacteristicTehoUltra ClassicPika-Teho
The recommended scope of applicationoil dye of traditional type for finishing of front part of buildings, frames and doors from woodcovering for operation in severe weather patterns with low temperatures and sharp differences of its indicatorstructure for protection and dressing of sheathing boards, outside products from wood, logs and fences
Expense of 1 l (first layer)1599
Expense of 1 l (second layer)1176
Structurealkyd substancespoliacrylate basiswater basis, the impregnating oil and acrylates

The responses left at forums to these exterior paints on tree reflect both advantages, and shortcomings of compositions of Tikkurila:

“Dye is not economic. Despite the consumption rates established by the producer, coloring is followed by big word formation. Therefore when putting paint all the time it was necessary to observe extreme accuracy. If not to do it, smudges appear. Approximately in 4 years on covering the small network of cracks has appeared”.

“Tikkurila – excellent paint. Excellent color gamma and excellent result. The covering completely pays back all expenses and effectively looks on house facade”.

What paint for tree for outside works is better: main types of structures

Popular series of paints of Belinka for tree for outside works

Dyes of Belinka of the Slovenian production consider need of protection of wood against negative impact of insects, fungi and mold. The covering is capable to serve for 10-15 years. Dyes are successfully applied to giving to surfaces of different shades. Besides, they strengthen natural textural pattern of wood. Popular series of dyes are Toplasur, Tophybrid, Toplasur UV Plus.

The Toplasur series is applied to protective finishing of the following elements:

  • polished logs;
  • facades of wooden buildings;
  • door assemblies;
  • window frames.

The structure does not contain biocidal substances. Throughout long term the covering keeps attractive external characteristics and is exposed to cracking.

Helpful advice! For coloring of wood it is better to use brush. This tool provides the best imposing of structure and impregnation of material. Specialists advise to select the brushes providing big intake of paint. Optimum width is 7.5-12 cm.

Structures of Tophybrid belong to the category of universal dyes. They are perfectly combined with any types of wooden surfaces. The Toplasur UV Plus series is suitable for finishing of door and window assemblies which are operated in the conditions of intensive influence of atmospheric factors.

Structures of Belinka: characteristics of paints on tree for outside works, responses

Main characteristics of dyes of Belinka:

CharacteristicTophybridToplasurToplasur UV Plus
The recommended scope of applicationthe strengthened protective processing of wood and coloring in widespread shadesprotective processing of front part of the building, timber doors and framesprotective processing of wood from ultraviolet rays, strengthening of natural structure thanks to colourless polymeric covering
Expense of 1 l (first layer)252020
Expense of 1 l (second layer)151010
Structureemulsion on alkyd basis with the water-repellent components and elements showing resistance to atmospheric actionsdye on the basis of high-quality alkyd resin and pigments, the structure has included protective components, firm wax and solvents of organic origindye on the basis of the alkyd resins, pigments protecting from ultraviolet rays, absorbents, solvents in the form of organic chemistry and firm wax

Reviews of consumers of paint of Belinka:

“I am quite happy with covering, but there are also minuses. When drawing the first layer the tree absorbs large amount of paint. The structure in the form of annual growth rings is looked through very well. But here in places where mastic comes across, paint is not capable to get into material depth. As a result on surface there are noticeable specks”.

“Recently has bought for protection of facade paint of Belinka on tree. Excellent quality. The truth in practice it has become clear that it is not necessary to be interrupted when drawing one layer. Otherwise places on joints will be noticeable. Such result turns out even if there have not passed 2-3 hours from the moment of drawing. But the procedure of coloring very simple. It is only enough to work surface by means of rigid brush”.

Popular series of Neomid paints for tree for outside works

Products of the Neomid company are known in the market at the expense of effective line of the funds allocated for preparation of wooden surfaces. The bleaching structures are in great demand, as for owners of houses, and large builders.

For processing of wooden products materials of the following types are used:

  • masonry paint of Neomid;
  • bio color aqua;
  • bio color ultra.

Neomid dye for wooden facades creates on surface covering with dirt-resistant properties and moisture resistance. Such finishing is capable to sustain repeated change of temperatures. This type of dye is recommended to be applied to primary coloring of surface or updating of already existing paint and varnish layer.

Helpful advice! The qualitative result of coloring is possible only on condition of thorough training. The surface is recommended to be cleaned from stratifications of dirt and dust and also to remove old paint coat. If wood is struck with blue, it is better to apply bleach, for example, of Neomid 500.

Structures of the Bio color aqua series have no unpleasant smells. In addition to the list of standard characteristics for outside dyes, mix includes microwax. As structures have no necessary covering ability, the producer has added double dose of the components protecting covering from ultraviolet. Before painting performance by acrylic paints on tree mix is tinted.

At the heart of Bio color ultra dyes there are bactericidal components preventing development of fungi and mold. According to information of the producer the covering frightens off insects. The structure is suitable for dressing and protection of the different wooden surfaces operated in adverse weather conditions.

Characteristics of coverings of Neomid, responses

Main characteristics of Neomid dyes:

CharacteristicBio color ultraFrontBio color aqua
The recommended scope of applicationprotection and dressing of wooden products, on surface forms thick indelible layer which is not afraid of rainfall and direct beams of the sunprocessing of facades against mold and fungus, on surface is formed thin film covering with high adhesive properties, the good passing ability and resistance to repeated deformation changesthe decorative coat of lessors type differing in ecological purity creates elastic and strong covering in the form of film which partially gets deep into wood, is not washed away by water and resists to ultraviolet
Expense of 1 l (first layer)121012
Expense of 1 l (second layer)987
Structuremix on the basis of alkyd resins, substances of active action and pigmentsstructure on the basis of acrylic copolymers, active elementsdye on the basis of acrylic copolymers, pigments and active agents

Reviews of buyers of Neomid products:

“Has tried Neomid paint. I do not see anything bad, but also good too. In comparison with other options it is possible to tell that the firm middle. After painting of tree acrylic paint has clear that it is expected soft weather conditions. At -40 °C the covering has badly proved when the facade has thawed on surface there was considerable raid with crystal structure. In some places the protective film has burst”.

“Good paint, economic. Used for painting of the shed. On old coat of paint has laid down not really exactly, but it not essentially”.

The description of structures from the catalog of paints for Teknos tree

This category of dyes is characterized by high cost. At the same time costs of purchase of structures are quite justified, they become covered at the expense of long life cycle – 30 years. Builders apply these products to finishing of buildings from wood of prestigious level.

Paints for tree of Teknos are provided by the following series of finishing materials:

  • woodex eko;
  • woodex classic;
  • haiti.

The range Woodex eko has oil basis and is presented in the form of lessors antiseptic. Causing structure does without smudges and splashes. On surface the thin uniform covering with high margin of safety is formed.

Helpful advice! If to add color to Woodex eko dye, the covering will provide protection of wood against influence of ultra-violet radiation.

The structure is suitable for updating of decorative layer in the form of lessors antiseptics or primary drawing on wooden surface:

  • logs;
  • glued bar;
  • boards for covering;
  • the pro-thinned-out bar.

Woodex classic forming covering without smudges will be ideal for processing of vertical and horizontal surfaces. The person without experience will even cope with drawing. The covering turns out velvety and nice on the touch.

Woodex classic is applied to finishing:

  • external walls of the building
  • window designs;
  • fences;
  • terraces;
  • moorings.

Pay attention! Coverings of the Woodex classic series are used only for primary drawing. Structures cannot be applied on earlier painted surfaces.

Characteristics of paints for Teknos tree, responses

Main characteristics of Teknos dyes:

CharacteristicWoodex classicHaitiWoodex eko
The recommended scope of applicationthe tinting antiseptic with jellylike structure for easy drawing allowing to be limited to one coat layer well impregnates upper layers of material and provides protection against atmospheric factors of influenceprotection of wood against biological and atmospheric factors of destruction on the basis of high-quality alkyd resins, shows resistance to fungi, seaweed, mold, the increased level of moisture and sharp temperature differences in the range from +50 to -50 °Cantiseptic of lessors type which keeps the natural wood drawing and by means of thin covering protects surface from deformation loadings, for this purpose there is enough drawing in two layers
Expense of 1 l (first layer)121012
Expense of 1 l (second layer)888
Structuremix on the basis of organic solvents, pigments and substances with active actionthe dye including alkyd resins, solvents of organic origin, antiseptics, colorstructure with large amount of oils, there are no solvents of organic origin

Reviews of consumers of Teknos dyes:

“Used Teknos Woodex classic paint for processing of covering on balcony. Mix well lays down, is not exposed to fast burning out under the influence of bright sun. Long time could not pick up suitable finishing as the balcony is on South side and all dyes year later lost the color. Has not stopped yet on Teknos which perfectly looks already 7 years”.

Popular series of Zobel dyes on tree for outside works

Consumers for 17 years have opportunity to buy paint for Zobel tree from the German producer. The high quality of these coverings is confirmed with compliance of all standards. Products are universal, the range includes structures suitable for operation in different climatic zones. For convenient selection of shades the producer offers large number of colors.

The following types of structures are considered as popular dyes:

  • Deco-tec 5400;
  • Deco-tec 5450;
  • Protec 450.

The structure of Deco-tec 5400 represents finishing covering. In addition paint performs primer function that allows to lower expenses significantly.

Pay attention! Dye does not contain antiseptics therefore before its drawing it is recommended to process material protective structure.

Before coloring wood is carefully ground. After the first coat layer is put, it is necessary to wait until it dries, and then to work by means of sponge or fine-grained emery paper, removing pile. This procedure will allow to prevent capillary movement of liquid in wood on pile.

Deco-tec 5450 dye is water-based structure. According to information declared the producer, this type of covering excludes the probability of emergence of peeling on surface. At influence of deformation loadings the thin film covering keeps the integrity. As the surface is not inclined to peeling, updating of paint and varnish layer is carried out by repeated causing structure, without resorting to removal of old.

During the work with structure of Protec 450 it is important to maintain optimum level of viscosity. It is not recommended to use sprayers. It is better to give preference to brush. The abrasive paper with grain 100-120 will be suitable for surface preparation.

Characteristics of popular structures of Zobel

Main characteristics of Zobel dyes:

CharacteristicDeco-tec 5450Deco-tec 5400Protec 450
The recommended scope of applicationprocessing of wooden surfaces with formation of opaque weatherproof covering, dye has water-repellent potential, deeply gets into material and creates thin film which is not allocated with wear resistance therefore intensive impact of wind and dust is capable to damage finishingthe varnishing covering with the covering ability for protection of facades, thanks to the properties blocking formation of drops, technology of drawing considerably becomes simpler, and the covering well lays down on surface and shows resistance to burning out under the influence of the sunthe white dye of intermediate assignment used as finishing covering and diluted by water shows high resistance to factors of atmospheric influence, availability as a part of special pigment (Titanium dioxide) provides maintaining whiteness about 6-7 years, the thixotropy is inherent in product
Expense of 1 l (first layer)101010
Expense of 1 l (second layer)885
Structureemulsion alkyd acrylate of type and set of the standard and also micronized pigmentsemulsion alkyd acrylate of type and set of the standard and also micronized pigmentsdye on the basis of acrylate

Features of Pinotex paints for tree for outside works

Pinotex produces dyes of different function. At the assortment there are even several kinds of structures for processing of door and window assemblies.

Pinotex Doors&Windows paint has water-soluble basis and includes the active agents directed to fight against blue and mold. The qualitative result turns out due to drawing 2-3 layers by means of brush. Drying-out of structure between layers requires 4 hours, full drying – 12 h. One liter of dye is enough for processing of 11 m² sawn wood and 13 m² planed material.

Helpful advice! To provide reliable protection against ultraviolet and rainfall, this type of paint is recommended to be used in combination with Pinotex Wood Primer soil.

The mix Pinotex Lacker Aqua represents the tinted varnishing structure on water-soluble basis. Paint creates on surface smooth covering with elastic, dirt-resistant and water-repellent properties. The product emphasizes beauty of natural wood texture, is evenly distributed and provides resistance of material to abrasion, scratches and other mechanical damages and also influence of cleaning agents.

The overview of Dufa paints for outside woodworks

The German producer Dufa releases high-quality paints and varnishes. The range of the producer is various and includes colored lakes, alkyd and acrylic structures, coverings with high stock of firmness on wear and other useful products for internal and outside application.

Dyes of the Premium Woodflex series belong to the category of universal coverings. They not only provide protection of material against damage, but also are capable to push away dirt and water.

Pay attention! Premium Woodex dyes can be used not only for wood processing. Material is suitable for finishing of slate, galvanized metal, brick, etc.

Premium Woodex has set of advantages:

  • weatherability;
  • elasticity;
  • good adhesive properties;
  • resistance to aggressive influence of industrial emissions.

On surface dye forms glossy surface with silky effect. The covering due to high elasticity well reacts to deformation changes in wood.

The choice of color of paint on tree: color gamma and recommendations

The right choice of color is extremely important as the shade provides not only external design, but also has impact on environments.

By means of color it is possible to influence perception of object in general:

  • to hide or on the contrary, to emphasize all shortcomings of construction;
  • it is effective to allocate interesting architectural elements;
  • to visually change design form;
  • to affect insolation degree, having increased it or having reduced.

The high resistance to ultraviolet is shown by light colors and also gray shade. Unlike white wall surfaces in gray color are not exposed to yellowing. At the same time the external novelty of covering as on it dust is not visible remains. By means of light shades it is possible to increase visually the object size therefore they are recommended to be used when the architectural design has provided scale and greatness.

The choice of optimum shades for paints under tree

Quite often consumers resort to use of coloring under tree. By means of this method it is possible to create pronounced wood structure on surface.

And such dyes can be applied also on other surfaces to imitation creation:

  • metal;
  • wood-shaving plate;
  • medium density fibreboard;
  • plastic.

The basis for coloring is selected according to surface material. For creation of necessary effect it is necessary to pick up carefully shades of paints for doors under tree. For this purpose the light color gamma and contrasting dark will be required. The light gamma can be provided by sand, light yellow or beige shade. The Bordeaux, saturated brown color and black will be suitable for dark contrast.

The choice of color combination is curled from the breed of wood chosen for imitation. Fortunately, modern paints and varnishes allow to pick up not only qualitative covering, but also necessary coloring. Having stopped on dye of certain trademark, it is necessary to consider that all accompanying means or shades for creation of effect under tree have to belong to the same producer. Only in this case the covering will be able long to serve.

Like this post? Please share to your friends:
Leave a Reply